Prices

Niagara 4 Certification Training Programme (TCP) course (1 week, Instructor Led), Supplied by Tridium University

Niagara 4 Advanced TCP Course (1 week, Instructor Led)

Supplied by Tridium Support team, TPS Products Technical Support (up to 8 hours in 90 day period following order placement)

PC based Niagara Supervisor any Platform, Windows/Mac/Linux supported, Bacnet, Modbus, LON, Mbus, Mqtt, KNX and etc Drivers included

JACE9000 IoT controller, Tridium Logo, SD card incl., Bacnet, Modbus, LON, Mbus, Mqtt, KNX and etc included

Jace9000 250Points +5 Niagara Devices, Bacnet, Modbus, LON, Mbus, Mqtt, KNX and etc included

JACE8/9000 Dual Port RS-485 expansion

Niagara Edge 10 field controller with 10 points of onboard IO, 1 RS-485 serial port, and 2 10/100 Ethernet ports. Supports 2 IO-R-34 modules. Includes Niagara N4 and drivers for BACnet, Modbus and SNMP. Supports up to 3 devices and 50 total points. Includes all software updates released for commercial use by Tridium for the life of N4, but not for any later versions. Tridium EMEA Branded.

expansion module JACE 8000/9000 and Niagara Edge 10 34 Point IO, don't count against a license limit

expansion module JACE 8000/9000 16 Point IO, don't count against a license limit

Demo version of Supervisor and Workbench engineering tool. After first Year. Demo Licenses for partner engineering and demo use only. Not for end-user sales

On-site installation (8 hours integration), including panelboard with battery backup. 230VAC power supply to be provided by customer. Includes iPad 9th Generation (mounted in front door)

Supplied by OÜ Couplant team, Installation Annual Support, includes 8hours Support on site in 180 day period, total 16hours in 1 year

Consulting Phone, 1hr

Consulting on SITE, Software Engineering, Niagara Framework 4.14, Siemens ABT Site, Siemens Logo! soft, TIA Portal, KNX ETS6. 90 minutes

If it is necessary for future Improvements and to be cybersecured, Software Update if there's new Niagara version, incl. work on site

TCM BOX Cloud subscription, monthly

TCM Sensor T Cloud subscription, monthly

TCM additional subscritption, if there's more then 1 subscription in Same Cloud, monthly

Measuring device supporting 5pcs 1-wire sensors (1 sensor included), cloud connectivity, and 230V power

Measuring device supporting 5pcs 1-wire sensors (1 sensor included), cloud connectivity, and 5V power

Measuring device supporting 5pcs 1-wire sensors (1 sensor included), cloud connectivity, and battery power (2-year lifespan)

1 wire Sensor 2m, fits to TCM Sensor T(max 5pcs for one box) and TCM BOX(max 10pcs for 1 box), bus topology max 60m

1 wire Sensor 3m, fits to TCM Sensor T(max 5pcs for one box) and TCM BOX(max 10pcs for 1 box), bus topology max 60m

1 wire Sensor 5m, fits to TCM Sensor T(max 5pcs for one box) and TCM BOX(max 10pcs for 1 box), bus topology max 60m

Mesuring device 6000A with Cloud connectivity, supports 10pcs 1wire sensors and integration of 5pcs Modbus RTU devices, digital inputs, outputs, impulse input.

Mesuring device 450A with Cloud connectivity, supports 10pcs 1wire sensors and integration of 5pcs Modbus RTU devices, digital inputs, outputs, impulse input.

This M-Bus to Modbus RTU (RS-485/RS-232) converter translates M-Bus signals to Modbus (RS-485/RS-232), enabling M-Bus devices to communicate on a Modbus network. 90-250V ~, 50-60Hz, Only Transparent mode up to 250 Devices max 375mA

This M-Bus to Modbus RTU (RS-485/RS-232) converter translates M-Bus signals to Modbus (RS-485/RS-232), enabling M-Bus devices to communicate on a Modbus network. 12 - 36 VDC, When operating as a server, it supports a maximum of 250 M-Bus devices.

This M-Bus to Modbus RTU (RS-485/RS-232) converter translates M-Bus signals to Modbus (RS-485/RS-232), enabling M-Bus devices to communicate on a Modbus network. 12 - 36 VDC, When operating as a server, it supports a maximum of 100 M-Bus devices

This M-Bus to Modbus RTU (RS-485/RS-232) converter translates M-Bus signals to Modbus (RS-485/RS-232), enabling M-Bus devices to communicate on a Modbus network. 12 - 36 VDC, When operating as a server, it supports a maximum of 80 M-Bus devices

This M-Bus to Modbus RTU (RS-485/RS-232) converter translates M-Bus signals to Modbus (RS-485/RS-232), enabling M-Bus devices to communicate on a Modbus network. 12 - 36 VDC, When operating as a server, it supports a maximum of 50 M-Bus devices

This M-Bus to Modbus RTU (RS-485/RS-232) converter translates M-Bus signals to Modbus (RS-485/RS-232), enabling M-Bus devices to communicate on a Modbus network. 12 - 36 VDC, When operating as a server, it supports a maximum of 10 M-Bus devices

The MX-2 data logger reads data from various meters (electricity, heat, water, gas, etc.), stores it locally, and facilitates data exchange via RS-232/RS-485 and Ethernet.

The MX-3 data logger reads data from Modbus and M-Bus devices and analog inputs, logs this data, and transmits it to remote users/servers via a Modbus GPRS modem. It also sends SMS alerts for alarm events. The MX-3 is compatible with Kamstrup, Sensus, DIEHL, Danfoss, Itron, Landis & Gyr, and other meters (including specialized industrial meters). Additionally, it can control and read data from other controllers such as the Danfoss ECL 300.

2wire, Double-shielded data cable. Interface RS 485. Low capacitance. Price for 1 meter

4 wire, Double-shielded data cable. Interface RS 485. Low capacitance. Price for 1m

The MX-1 is designed to read data from meters (electricity, heat, water, gas, etc.) with an M-Bus interface (up to 25 M-Bus devices) or Modbus (RS-485) and to store/exchange this data with client software via GSM/GPRS.

The MX-4 is a real-time data logger designed for data logging and analysis. Using GPRS/GSM, it transmits data to remote users/servers. The MX-4 also communicates with other controllers and sensors. It offers a wide range of interfaces and protocols (Modbus RTU, Modbus TCP/IP, IEC 60870-5-104:2000, etc.) and can read data from various meters, controllers, and sensors using standard protocols.

The MX-6 data logger facilitates data exchange between a 2.4 GHz XBee radio network and Ethernet and RS-485 networks (using the Modbus RTU protocol).

The MX-7 data logger reads data from Modbus and M-Bus devices and transmits it to remote users/servers via Modbus GPRS modem or Ethernet. It also sends SMS alerts for alarm events. The MX-7 is compatible with Kamstrup, Sensus, DIEHL, Danfoss, Itron, Landis & Gyr, and other meters (including specialized industrial meters). Its versatility makes it suitable for commercial, industrial, and building management applications (business centers, shopping malls, public institutions). The MX-7 features analog inputs (current, voltage, resistance, or PT100 temperature sensors), digital inputs (for logging alarms, events, limit switches, push buttons, etc.), and digital outputs (for remote control). Remote data access is facilitated using the standard open Modbus TCP/IP protocol, simplifying the integration of various signals and systems into your management software.

IP68, The MX-8 data logger records pulse output signals from various metering devices and sensors (pressure, temperature, etc.) via a serial interface. It logs the pulse count for each recording interval and transmits all collected data to a server at a specified frequency using a 2G, 3G, 4G, or NB-IoT connection. Its battery power makes it suitable for a wide range of applications.

The MX-9 data logger reads data from Wireless M-Bus, Modbus, and M-Bus devices and transmits it to remote users/servers via Modbus GPRS modem or Ethernet. It also sends SMS alerts for alarm events. The MX-9 is compatible with Kamstrup, Sensus, DIEHL, Danfoss, Itron, Landis & Gyr, and other meters (including specialized industrial meters).

The MX-10 data logger provides real-time data logging and analysis, transmitting data to remote users/servers via a 2G/4G network. It supports a wide range of interfaces and protocols, enabling it to read data from various meters, controllers, and sensors using standard protocols. The MX-10 also functions as a Modbus TCP/IP converter, combining the capabilities of a data logger and an M-Bus to Modbus converter in a single device. It's ideally suited for monitoring and smart metering systems.

The RAY-1 data logger is designed for real-time logging and analysis of various discrete signals (limit switches, push buttons, selector switches, or relay contacts). Supporting RS-232, RS-485, Ethernet, and USB interfaces, it handles up to 32 discrete input channels and functions as a standalone device or extension module. It's compatible with our MX-7 and MX-5 data loggers. For data exchange via Ethernet or serial (RS-232/RS-485) interfaces, it uses Modbus TCP/IP, Modbus RTU, and other protocols.

The RAY-2 data logger measures and logs various discrete signals, tracks discrete input status and impulse counts, controls devices (discrete output control), generates discrete output signals, archives data, and sends data to a local operator via RS-232/RS-485 or USB, and to a remote operator via GSM/GPRS or Ethernet.

The RAY-3 data logger measures analog parameters (voltage, current, resistance), tracks discrete input status, generates discrete output signals, archives data, and transmits data to local users/servers via RS-232/RS-485 or USB, and to remote users/servers via Ethernet and/or GSM/GPRS/EDGE or UMTS/HSPA+ using the Modbus TCP/IP protocol. Up to 6 analogue input, 2 analogue output, 4 discrete input, 2 discrete output, battery backup, miscro SD included

The RAY-6 data logger measures analog parameters (voltage, current, resistance), monitors discrete input status, generates discrete output signals, archives data, and transmits data to local users/servers via RS-232/RS-485 or USB, and to remote users/servers via Ethernet and/or GSM/GPRS/EDGE or UMTS/HSPA+ using the Modbus TCP/IP protocol. Up to 16 analogue input, 8 discrete input, 16 discrete output relays